Panasonic AV-HS6000 Series Operation Manual page 58

f Modify the following pattern waveforms.
- 3D: 99, 100, 101, 102
1
Select the <ME1>/<ME2> button → [BKGD] → [Modify] tab.
2
Select an item in [Light] in the [Pageturn] column.
[Off]
[On]
3
Set [Size] in the [Pageturn] column.
f Set the size for reduction.
4
Set [Radius] in the [Pageturn] column.
f Set the radius for the turn page effect.
5
Set [Angle] in the [Pageturn] column.
f Set the direction for the turn page effect.
Setting spin effects
A spin effect can be added during the background transition.
1
Select the <ME1>/<ME2> button → [BKGD] → [Modify] tab.
2
Set [X‑Spin], [Y‑Spin], and [Z‑Spin] in the [Spin] column.
f This sets the amount of rotation of the spin effect during background transition.
f An effect can be added to the following pattern waveforms.
- [Z-Spin]
WIPE: 1 - 15, 17
SQ: 42 - 45
- [X-Spin], [Y-Spin], [Z-Spin]
SQ: 41, 51 - 54
f The pattern waveform SQ46 (spin waveform) with the system version earlier than 3.00-00-0.00 is integrated to SQ41 with the system version
3.00‑00‑0.00 or later. It is converted to the pattern waveform WIPE1 when a project file set in SQ46 with the system earlier than 3.00‑00‑0.00 is
loaded.
3
Select the [Spin Mode] item in the [Spin] column.
[Off]
[Trans Spin]
[Auto Spin]*
[Manual Spin]*
* It may become discontinuous at the edge of transition in the [Auto Spin] or [Manual Spin] modes.
Setting the Multi Pattern effect
The wipe pattern can be divided to the specified number.
f Enabled when the following pattern waveform is selected.
- WIPE
1
Select the <ME1>/<ME2> button → [BKGD] → [Modify] tab.
2
Set the specification method of the number of division in [H/V Sync] of the [Multi] column.
[On]
[Off]
3
Set the number of division in horizontal and vertical direction in [H] and [V] of the [Multi] column.
Setting the Modulation effect
An effect to ripple the wipe edge can be added.
f Enabled when the following pattern waveforms are selected.
- WIPE: Except 24 (Free Wipe)
- SQ: 42, 43, 44, 45
1
Select the <ME1>/<ME2> button → [BKGD] → [Modify] tab.
2
Set [Amplitude], [Frequency], and [Speed] in [H Modulation] and [V Modulation].
[Amplitude]
[Frequency]
[Speed]
Chapter 5 Basic Operations — Wipe
Does not add the lighting effect.
Adds the lighting effect.
Does not spin regardless of setting value of [X-Spin], [Y-Spin], and [Z-Spin].
Spins in specified amount of spin depending on the transition.
Spins in speed in accordance with specified amount of spin regardless of the transition.
Tilts in specified amount of spin regardless of the transition.
Makes the number of division the same in horizontal and vertical directions.
Different number of division can be specified for horizontal and vertical directions.
Sets the amplitude of the wave.
Sets the frequency of the wave.
Sets the speed of the wave movement.
– 58 –