Displaying Video Input Signal Information - Panasonic AV-HS6000 Series Operation Manual

DVI format [Mode]
[Fit-V]
1080/59.94p
1080/50p
1080/59.94i
1080/50i
(1920×1080)
[Fit-H]
[Full]
[Fit-V]
720/59.94p
720/50p
(1280×720)
[Fit-H]
[Full]
: Black images are inserted here.
: The parts of the images protruding in these areas are cropped.

Displaying video input signal information

Displaying the SDI input signal information
Display the information concerning the SDI input signal images.
f The information cannot be changed.
1
Select the <IN OUT> button → [SDI IN] → [Status] tab.
2
Check the [SDI IN 1] to [SDI IN 32] columns.
[Format]
[Audio]
Displaying the DVI input signal information
Display the information concerning the DVI-D input signal images.
f The information cannot be changed.
1
Select the <IN OUT> button → [DVI IN] → [Status] tab.
2
Check columns from [DVI IN 1]/[DVI IN 2].
[Size]
[Dot Clock]
[H‑Frequency]
[V‑Frequency]
Chapter 6 Input/Output Signal Settings — Setting input signals
HD/1080i
1920×1080
1920
1080
1920
1080
1920
1080
1920
1080
1920
1080
1920
1080
Displays the input format.
When there is no input signal, [No signal] is displayed.
For formats that are not supported, [Undefined] is displayed. If horizontal pixels are the same, false detection may occur.
Displays the presence or absence of audio packets in the audio channels 1 to 8.
[*]: audio packet is present; [t]: audio packet is absent.
Ex) When only channels 1 to 4 have audio packets, the following is displayed.
[**** tttt]
Indicates the pixel count of the image.
Indicates the dot clock frequency of the image.
Indicates the horizontal frequency of the image.
Indicates the vertical frequency of the image.
HD/720p
1280×720
1280
720
1280
720
1280
720
1280
720
1280
720
1280
720
– 124 –
SD/NTSC SD/PAL
720×487 720×576