Die-cut Labels (Black Marks) and Fanfold Paper
When Borderless Printing Enabled
Margins at top, bottom, right, and left (inside label): 0 mm (typical value)
Paper width
center
Perforated line
Auto cut position
Auto cut position
Perforated line
Auto cut position
Waste part 2.0 mm
• Set the perforated line interval so that it becomes an integral multiple of
• To prevent unstable printing due to the perforated line and print area
c
IMPORTANT
Q
The maximum value of the print area width is 104 mm.
Note
Backing paper width
Print area width
the issuing interval.
overlapping or shortening of the cutter life due to the perforated line and
auto cut line positions overlapping, use paper with black marks on the
back to align the paper position.
Waste part 2.0 mm
*1: When not auto cutting, 8.0 mm or more
*2: When not auto cutting, 11.0 mm or more
Paper feed
direction
Print area
Label
Backing paper
Black mark position
(back side)
72