Mitsubishi Electric MELSEC-A Series Manual page 68

2
REPLACEMENT OF MELSECNET (II) AND /B (PLC TO PLC NETWORK)
(b) MELSECNET (II) 2-tier local station L2
As the cyclic communication is performed according to the network range assignments of the 2-tier
master station (A3UCPU), there is no parameter setting for network range assignment on 2-tier local
stations.
(c) MELSECNET (II) 2-tier local station L1/3-tier master station m
The following describes the network parameter setting of MELSECNET (II) 2-tier local station L1/3-
tier master station m (A3UCPU).
1) Network parameter setting (A3UCPU: MELSECNET (II) 2-tier local station L1/3-tier master station m)
2) Network range assignment (A3UCPU: MELSECNET (II) 3-tier master station m)
3) Refresh parameter (A3UCPU: MELSECNET (II) 3-tier master station m)
(d) MELSECNET (II) 3-tier local station l1, l2
As the cyclic communication is performed according to the network range assignments of the 3-tier
master station (A3UCPU), there is no parameter setting for network range assignment on 3-tier local
stations.
2
- 31