Installing Software; To Install Software From Cd-Rom - HP E3456A User Manual

Emulation for the powerpc mpc500
Table of Contents

Advertisement

Chapter 2: Installing the Emulation Module

Installing Software

Installing Software
This chapter explains how to install the software you will need for your
emulation module.
Installing and loading
Installing the software will copy the files to the hard disk of your logic
analysis system. Later, you will need to load some of the files into the
appropriate hardware module.
Logic analysis system or logic analyzer frame
Install
Load
Logic analyzer
CD-ROM or
Hard Disk
or emulation
flexible disk
module
What needs to be installed
If you ordered an emulation module with your logic analysis system,
the software was installed at the factory.
The following files are installed from the CD-ROM:
• Emulation module firmware.
• Emulation Control Interface.

To install software from CD-ROM

Installing a processor support package from a CD-ROM will take just a
few minutes. If the processor support package requires an update to
the HP 16600A/16700A-series logic analysis system's operating system,
installation may take approximately 45 minutes.
54

Advertisement

Table of Contents
loading

This manual is also suitable for:

16610a

Table of Contents