Chapter 1: Installing the Emulation Probe
Connecting a Terminal to the Emulation Probe's Serial Port
To verify serial communications
1 Start a terminal emulator program on the host computer.
If you are using a PC, the Terminal application in MS Windows 3.1, or
the HyperTerminal application in MS Windows 95/NT, will work fine.
If you are using a UNIX workstation, you can use a terminal emulator
such as cu or kermit.
2 Plug the power cord into the emulation probe.
When the emulation probe powers up, it sends a message (similar to
the one that follows) to the serial port and then displays a prompt:
36