Wiring Of The Camera - Bosch AVIOTEC IP starlight 8000 Operation And Commissioning Manual

22 en | Installation
4.7

Wiring of the camera

Connection to Ethernet via PoE Ethernet cable
Notice!
Use only PoE approved devices.
The camera is intended to be powered via a STP Category 5e cable in a Power-over-Ethernet
(PoE) network environment . This is the default power supply.
1.
2.
P
2020.08 | 01 | F.01U.391.015
Connect the camera to a 10/100 Base-T network.
Use STP Category 5e cable with RJ45 connectors (the camera network socket is Auto
MDIX compliant).
The LEDs beside the Ethernet connection indicate network connection (green lit) and IP
traffic (orange flashing).
Operation and Commissioning Manual
AVIOTEC IP starlight 8000
Bosch Sicherheitssysteme GmbH