Oximeter; Roll Stand - Philips DreamStation 2 User Manual

3. Tap Update to continue with the software upgrade. To cancel the software upgrade, tap
Cancel.
4. When the update begins, the screen displays "Software Update Active" and the therapy
button ring flashes. The screen will then appear black or may display a progress bar until
the update is complete.
5. The device will restart when the upgrade is complete. Remove the SD card.
6. If an error occurs, contact Philips Respironics for a new SD card.

Oximeter

The DreamStation 2 Advanced device can pair to a Nonin BT Pulse Oximeter, using
Bluetooth, for measuring %SpO2 and pulse rate.
To use a pulse oximeter with your therapy device, follow these steps.
1. Follow the setup instructions provided with your pulse oximeter and finger sensor.
2. Attach the finger sensor to your forefinger.
3. Press the Therapy button on your device to begin therapy.
4. Once the device detects a good connection with the pulse oximeter, both the Bluetooth
symbol and "SpO
Note: It may take up to 30 seconds for the device to recognize the pulse oximeter.
When you have achieved at least 4 hours of therapy and oximetry use, a pop-up will appear
stating the pulse oxitmetry reading was successful. If you do not reach the minimum therapy
hours, a pop-up appears stating that the pulse oximetry reading was unsuccessful.

Roll stand

There is a roll stand available for use with your DreamStation 2 device. Please see the
instructions included with your roll stand for more information.
" will display on the top of the display screen.
2
- 45 -