Philips DreamStation 2 User Manual page 27

1. To connect heated tubing (shown), line up
the pin connectors on the heated tube with
the bottom of the air outlet port on the
device. The clips at the end of the tubing
should be aligned to the sides of the port
and will click into place.
If you are using standard tubing (not
shown), simply slide the tubing over the air
outlet port on the device.
2. If you are using the optional 12 mm heated
tubing or 12 mm performance tubing,
connect the provided mask adapter to the
mask connection end of the tubing. The
12mm performance tubing also requires
a device adapter. When connecting the
adapter to the CPAP, the clips should be
aligned to the sides with the slight bump
facing straight down.
3. Connect the tubing to the mask. For proper placement and positioning, refer to the
instructions that came with your mask.
4. Attach the headgear to the mask if necessary. Refer to the instructions that came
with your headgear.
- 23 -