Table of Contents
Advertisement
6.6.2 To install the pinion shaft
1. Put the pinion shaft into the gear housing. Tap the
pinion shaft carefully with a soft head mallet to
attach it to the bearing seat in the gear housing.
CAUTION: Make sure that the metal surface
does not become damaged.
2. Put the shim ring on the pinion shaft.
3. Fill the gear housing with gear oil and assemble the
To assemble the product on page
product. Refer to
12 .
16 - Repair and servicing
6.6.3 To remove the drill spindle
Note: Replace the shaft seals if the drill spindle is
To replace the shaft seals for the drill
removed. Refer to
spindle on page 20 .
1. Remove the 2 snap rings with circlip pliers.
2. Push the drill spindle out of the gear housing with a
mandrel press. Refer to
Note: If the drill spindle does not come out of the
gear housing, tap the drill spindle carefully with a
soft head mallet to loosen it.
Servicing tools on page 6 .
1332 - 001 - 04.03.2021
Advertisement
Table of Contents
