Acer 930 Bios Manual page 30

These parameters allow you to specify the appropriate interrupt for each of
the PCI devices. You can assign IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10,
IRQ11, IRQ12, IRQ14, or IRQ15 to the slots.
Make sure that the interrupt you assign in any of
the PCI slots are not used by other devices to
avoid conflicts.
Press or to move between fields. Press
This item allows you to manually assign the interrupt for the onboard SCSI
hard disk when the PCI IRQ Setting parameter is set to
parameter is grayed and not user-configurable when the PCI IRQ Setting is
set to Auto and when the Onboard SCSI parameter under the Onboard
Devices Configuration screen is set to
This item shows the assigned interrupt for the onboard accelerated graphics
port (AGP) controller.
2-30
PCI SLOTS
or
ONBOARD SCSI
Manual
Disabled .
ONBOARD AGP
to select options.
. This
User's Guide