Acer 930 Bios Manual page 29

PnP/PCI System Configuration
PCI IRQ Sharing ............... [No ]
VGA Palette Snoop .............. [Disabled]
Graphics Aperture Size ......... [ 8 ] MB
Plug and Play OS ............... [Yes]
Reset Resource Assignments ..... [No ]
= Move Highlight Bar,
PCI IRQ Setting
This parameter allows for
you use plug-and-play (PnP) devices, set this parameter to
system then automatically assigns IRQ to the PnP devices. If your PCI
device is not a PnP, you can manually assign the interrupt for each device.
Refer to your PCI card manual for more information.
When the PCI IRQ Setting is set to
IRQ setting fields become gray and non-
configurable.
BIOS Utility
= Change Setting, F1 = Help
Auto or Manual configuration of PCI devices. If
Page 2/2
Auto . The
Auto , all the
2-29