1 G e t t i n g s t a r t e d
Preparing to use your Acer n35
Plug the USB sync cable into the 26-pin I/O connector on the bottom of your handheld
.
and plug the USB client connector into an available USB port on your computer
Charging your Acer n35
For initial use, you need to charge your handheld for three hours. After that, you can
charge it for a few minutes each day to recharge the battery to full capacity. Normally,
you can use your handheld for 8 straight hours of operation (backlight inactive)
before you need to recharge the battery.
To charge your Acer n35
Connect the AC adapter connector to the handheld, then plug the other end of the
AC adapter into any AC outlet.
11