Setting The Self-Timer - Acer CP-8660 User Manual

Setting the Self-timer

This setting allows images to be captured with the self-timer.
1. Slide the mode switch to [
dial to one of the photography modes.
2. Toggle the
Each press of the button moves the icon
one step through the sequence and
displays it on the screen.
For [Single] capture mode.
OFF [
[
For [
capture modes.
OFF [
3. Compose the image, press the shutter button down halfway, then press it down
fully.
The self-timer LED flashes and the image will be captured after the preset time
has elapsed.
The countdown is displayed on the LCD monitor.
To cancel the self-timer during operation, press the SET button.
The table below will help you choose the appropriate self-timer mode:
Self-timer mode
[ 10s] 10 sec.
[ 2s] 2 sec.
[ 10+2s]10+2 sec.
The self-timer setting is automatically cancelled after an image is captured.
Use of the [
motion-blur that can result when the shutter button is pressed at long
exposure times. Use a tripod for best results.
EN-24
] and set the mode
button to select the setting.
10s] 10 sec. [
10+2s ] 10+2 sec.
], [ ], [Continuous] and [AEB]
10s ] 10 sec. [
Description
The image is captured about 10 seconds after the shutter
button is pressed.
The image is captured about 2 seconds after the shutter
button is pressed.
The first image is captured about 10 seconds after the
shutter button is pressed, and then the second image is
captured 2 seconds later. The 10+2 mode is convenient
when capturing group images in succession.
2s] or [
2s ] 2 sec.
2s ] 2 sec.
10s] self-timer setting is effective in preventing