PLAYBACK MODE - THE BASICS
Viewing Images
You can display the still images one by one.
1. Rotate the mode dial to
,
or
and turn your camera on by
pressing the power switch.
2. Press the
button.
The last recorded image appears on
the LCD monitor screen.
Basic
information
indicators on the LCD monitor screen.
To see full information display, press
the
/
button.
3. Use the four-way controller to select the desired images.
For protected images/movie clips,
If there is no image stored in the internal memory or on the SD memory card, [No image]
message will appear on the LCD monitor screen.
You cannot enter the Playback mode from the Setup mode.
,
,
,
,
is
shown
by
mark will be displayed.
100-0001
100-0001
100-0001
EN-27