Appendix - Acer CL-6300 User Manual

APPENDIX

Troubleshooting Guide
Symptom
The power does not
turn on.
The camera suddenly
powers down.
The image is not
captured when the
shutter button is
pressed.
The flash does not fire.
Cannot transfer files
over a USB connection.
EN-56
Possible causes
* The batteries have run out.
* The batteries are not oriented correctly.
* The battery cover is not closed properly.
* The function of Auto off in setup menu has
been activated.
* The batteries have run out.
* The camera is in (Playback) mode.
* Memory is full.
* NO FLASH is selected in flash mode.
* The camera is in (Video) mode.
* The USB cable is not connected securely.
* The USB driver is not installed.
* The camera is turned off.
Solutions / Corrective Actions
*
Load new or fully charged batteries.
* Load the batteries in the correct direction.
* Close the battery cover correctly.
* Set the option of Auto Shut Down to Off.
* Turn the power back on or charge the
batteries.
Toggle the / MODE button to
*
the camera mode.
* Transfer the desired files to your
computer and then delete unnecessary
files, or use a different memory card.
* Select a different flash mode.
* Press the / MODE and switch to
the camera mode.
* Check all connections.
* Install the USB driver on your computer.
* Turn on the camera.