Table of Contents
Advertisement
Troubleshooting
Modem makes a connection but no data appears on your
screen.
1.
Make sure all communication parameters (baud rate, data,
stop, and parity bits) are properly configured and are
identical on both sides. Be certain hardware flow control
(RTS/CTS - default) is enabled in both the modem and the
communication software.
2.
Press the ENTER key several times. The remote system may
be waiting to receive your data before it begins.
Modem experiences errors while on-line with a remote modem.
1.
Make sure Call Waiting is turned off.
2.
Make sure RTS/CTS hardware flow control is enabled (do
not use XON/XOFF software flow control when transferring
binary files).
10
Advertisement
Table of Contents
