Ec-## Feedback Option; Rs-## Resolver Interface; Id-## Drive Information - GE AF-650 GP Programming Manual

Parameter Lists

4.1.14 EC-## Feedback Option

Par. No. # Parameter description
EC-1#
EC-10 Signal Type
EC-11 Resolution (PPR)
4 4
EC-2#
EC-20 Protocol Selection
EC-21 Resolution (Positions/Rev)
EC-24 SSI Data Length
EC-25 Clock Rate
EC-26 SSI Data Format
EC-3#
EC-34 HIPERFACE Baudrate
EC-6#
EC-60 Feedback Direction
EC-61 Feedback Signal Monitoring

4.1.15 RS-## Resolver Interface

Par. No. # Parameter description
RS-5#
RS-50 Poles
RS-51 Input Voltage
RS-52 Input Frequency
RS-53 Transformation Ratio
RS-56 Encoder Sim. Resolution
RS-59 Resolver Interface

4.1.16 ID-## Drive Information

Par. No. # Parameter description
ID-0#
ID-00 Operating hours
ID-01 Running Hours
ID-02 kWh Counter
ID-03 Power Up's
ID-04 Over Temp's
ID-05 Over Volt's
ID-06 Reset kWh Counter
ID-07 Reset Running Hours Counter
ID-1#
ID-10 Trending Source
ID-11 Trending Interval
ID-12 Trigger Event
ID-13 Trending Mode
ID-14 Samples Before Trigger
ID-2#
178
Default value 4-set-up
[1] RS422 (5V TTL) All set-ups
1024 N/A All set-ups
[0] None All set-ups
ExpressionLimit All set-ups
13 N/A All set-ups
ExpressionLimit All set-ups
[0] Gray code All set-ups
[4] 9600 All set-ups
[0] Clockwise All set-ups
[1] Warning All set-ups
Default value 4-set-up
2 N/A 1 set-up
7 V 1 set-up
10 kHz 1 set-up
0.5 N/A 1 set-up
[0] Disabled 1 set-up
[0] Disabled 2 set-ups
Default value 4-set-up
0 h All set-ups
0 h All set-ups
0 kWh All set-ups
0 N/A All set-ups
0 N/A All set-ups
0 N/A All set-ups
[0] Do not reset All set-ups
[0] Do not reset All set-ups
0 2 set-ups
ExpressionLimit 2 set-ups
[0] False 1 set-up
[0] Trend always 2 set-ups
50 N/A 2 set-ups
02/2016 All rights reserved.
Change Conver- Type
during sion index
operation
FALSE - Uint8
FALSE 0 Uint16
FALSE - Uint8
FALSE 0 Uint32
FALSE 0 Uint8
FALSE 3 Uint16
FALSE - Uint8
FALSE - Uint8
FALSE - Uint8
TRUE - Uint8
Change Conver- Type
during sion index
operation
FALSE 0 Uint8
FALSE -1 Uint8
FALSE 2 Uint8
FALSE -1 Uint8
FALSE - Uint8
FALSE - Uint8
Change Conver- Type
during sion index
operation
FALSE 74 Uint32
FALSE 74 Uint32
FALSE 75 Uint32
FALSE 0 Uint32
FALSE 0 Uint16
FALSE 0 Uint16
TRUE - Uint8
TRUE - Uint8
TRUE - Uint16
TRUE -3 TimD
TRUE - Uint8
TRUE - Uint8
TRUE 0 Uint8
DET-618D