Housing Dimensions Of The Display; Device Mounting Of The Display; Fastening To The Support Arm Adapter (Vesa) With Vas09.1-001 - Bosch Rexroth ctrlX HMI DE0015 Operating Instructions Manual

ctrlX HMI DE0015, DE0021 Multi-Touch
Displays (Housing Devices)
Thread
M2.5
M3
M4
M5
M6
Tab. 10-1: Tightening torque

10.1 Housing dimensions of the display

5
1
Fig. 10-1: Front view of the display
Display size Device height
①
15" (tube) 420
15" (VESA) 420
21" (tube) 333
21" (VESA) 333
Tab. 10-2: Housing dimensions of the display in diameters

10.2 Device mounting of the display

The display is intended for a VESA-compliant mounting (VAS09.1-001) and for
the tube mounting (VAS09.1-001). For all required and matching couplings for
the tube mounting, refer to

10.2.1 Fastening to the support arm adapter (VESA) with VAS09.1-001

The DE displays are provided with four M4 treads in square arrangement of 100
x 100 on their rear side to fasten a support arm adapter.
Tightening torque
0.4 Nm
0.7 Nm
1.4 Nm
2.8 Nm
3.0 Nm
2
4
Device width Device depth
② ③
546.8 160
546.8 87
402 160
402 87
chapter 5.6.1 "Housing coupling" on page 9
Mounting and electrical installation
Display width
④
346
346
478
478
R911405731_Edition 02 Bosch Rexroth AG
19/45
3
Display height
⑤
195
195
270
270