TM
APX
6000
Preparing Your Radio - Charging the IMPRES Battery
Initial Battery Charge:
1.
Must be in an IMPRES Adaptive Charger to properly
calibrate the IMPRES battery and enable the Smart
Energy features. This process is indicated by a
STEADY YELLOW indicator light.
2.
The process is automatic and includes an initial
reconditioning and then begins charging upon
completion of this process.
3.
To ensure optimum performance prior to the initial
use, all new batteries should be left in the charger
until the light turns solid green.
If this process is interrupted, the charger will
calibrate the battery upon the next insertion.
NOTE:
IMPRES batteries may be charged in conventional
chargers. However, the Smart Energy features will
not be enabled.
New batteries (never used before) may prematurely
indicate a full charge (STEADY GREEN indication).
22
Index