Connecting; Disconnecting - Toshiba PA3314U User Manual

Connecting

To connect the LAN cable, follow the steps below.
1. Save all your work. Turn off the power to the computer and to all external
devices connected to the Port Replicator and to the computer.
2. Plug one end of the cable into the Port Replicator's LAN jack. Press gently
until you hear the latch click into place.
3. Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.

Disconnecting

To disconnect the LAN cable, follow the steps below.
CAUTION: Before you disconnect the LAN cable, make sure the com-
puter is not accessing data. The green LED will glow when it is safe to
disconnect.
1. Pinch the lever on the connector in the Port Replicator and pull out the
connector.
2. Disconnect the cable from the LAN hub in the same manner. Check with your
LAN administrator before disconnecting from the hub.
Figure 4-2 Connecting the LAN cable
LAN
4-3