Advertisement
AMC2 4W-EXT
5
Installing
NOTICE!
i
To build an UL approved system refer the documentation
contained in the folder titled "_UL" on the delivered CD.
5.1
Mounting
The AMC2 can be attached on a standard 35 mm (1.377 in.)
mounting rail using a snap-in mechanism. Attach the AMC2 into
the upper edge of the mounting rail [1], then push down the
device and snap it onto the rail by pushing it towards the back
[2].
Figure 5.1 Mounting the AMC2 device on a mounting rail
Bosch Sicherheitssysteme GmbH
Installation manual
Installing | en
18
| V 2.6 | 2008.12
Advertisement
