Panasonic WX-SA250P Operating Instructions Manual page 22

Installation
3
Install the antenna
A A ttach the antenna to the hooks on the fixing bracket. (Four places)
Grooves
B O pen the screw cover on the side of the antenna
and use the included mounting screw (M3x8 mm) to
secure the antenna to the fixing bracket.
⿟ Screw torque: 0.59 N•m to 0.69 N•m {6 kgf•cm to
7 kgf•cm}
C C lose the screw cover.
Important
⿟ Make sure that the mounting screws on the antenna are tightened
Important securely to keep the product from falling.
Not doing so may cause the antenna to fall.
⿟ Use a tool such as a torque screwdriver to tighten the screws to the
specified torque.
⿟ Use a magnetic screwdriver.
4
Checking the installation
After completing the installation, check that all components are securely fixed.
Check that there are no loose parts.
22
Hooks
Antenna
mounting screw
(M3×8 mm)
(included)
Screw
cover