Power Requirements - GE AKTA GO Operating Instructions Manual

4.1.4

Power requirements

Introduction
This section describes the power supply requirements for ÄKTA go.
Electrical power requirements
The following table specifies the power requirements for the ÄKTA go instrument. For
power requirements for the computer, refer to the manufacturer's specifications.
Parameter
Supply voltage
Frequency
Transient overvoltages
Max power consumption
ÄKTA go Operating Instructions 29360951 AC
WARNING
Protective ground. The product must always be connected to a
grounded power outlet.
WARNING
Power cord. Only use power cords with approved plugs delivered
or approved by GE Healthcare.
Requirement
100 to 240 V~
50/60 Hz
Overvoltage category II
300 VA
4 Installation
4.1 Site preparation

4.1.4 Power requirements

39