Panasonic SF2B Series Quick Instruction Manual page 42

<When the intermediate mounting bracket (MS-SF2B-2) (accessory) is used>
The intermediate mounting bracket (accessory) configures as follows.
C part
1. Hook the C part into the groove on the side of the body and press it.
Note that the position to fit the C part onto the main body differs from the surface where
the intermediate mounting bracket is fit.
1
Front side of the main body
Grooves
Front side of the main body
<How to remove the bracket>
Insert a flathead screwdriver into the hole located on the rear side of the C part and tilt it
to the rear side of the main body to remove the C part.
42
D part
For rear mounting
C part
C part
1
1
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
E part
For side mounting
2
2
Flathead screwdriver
2