Panasonic SF2B Series Quick Instruction Manual page 41

3. Mount the brackets so that the protrusion of the A part and the B part are overlapped.
B part to be attached to the top or bottom side of this device differs depending on the di-
rection of mounting described as the following chart.
Protrusion of the B part
4. Mount the mounting bracket on to the mounting surface with two hexagon-socket head
bolts [M5 (purchase separately)] temporarily.
5. Adjust the height of the emitter and the receiver to level with the elongate holes and then
tighten the hexagon-socket head bolts.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
When mounting at the right side of the front surface
Protrusion of the A part
Front side of the main body
Hexagon-socket
head bolt (M5)
Purchase
separately
Hexagon-socket head bolt
[M5 (length: 5mm)]
B part
41