Huawei NetCol8000-E220 User Manual page 261

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Menu
Settings >
Comm
Settings >
SNMP
Settings
Settings >
Alarm
Settings >
T/H sensor
Issue 06 (2020-08-19)
Name
NMS IP address
NMS Port
number
See 4.4.2.3 Setting Communications Parameters (SNMP
Protocol).
Supply air high
temperature
alarm
Supply air low
temperature
alarm
Return air high
temperature
alarm
Return air low
temperature
alarm
Cold aisle high
temperature
alarm
Cold aisle low
temperature
alarm
Hot aisle high
temperature
alarm
Copyright © Huawei Technologies Co., Ltd.
Description
Enter the actual IP address
of the EMS. IP addresses of
the display panel, EMS
client, and EMS server
must be unique. This
parameter is configurable
when Link mode is set to
Client.
It is recommended that
you retain the default
value. If you need to
change the value, enter a
value as required. This
parameter is configurable
when Link mode is set to
Client.
Specifies the alarm
threshold for a certain
alarm.
Specifies the alarm
threshold for a certain
alarm.
Specifies the alarm
threshold for a certain
alarm.
Specifies the alarm
threshold for a certain
alarm.
Specifies the alarm
threshold for a certain
alarm.
Specifies the alarm
threshold for a certain
alarm.
Specifies the alarm
threshold for a certain
alarm.
C Parameter Description
Default Value
000.000.000.00
0
16100
40.0 ºC
5.0 ºC
45.0 ºC
15.0 ºC
40.0 ºC
10.0 ºC
45.0 ºC
252