Use Terminal Blocks - Panasonic MINAS A6B Series Reference Specifications

Size G 200 V

Use terminal blocks.

Terminal
No.
Symbol
(Upper to
bottom)
1 L1C
2 L2C
1 L1
2 L2
3 L3
4 P
5 B
6 N
7 U
8 V
9 W
Connector
Pin No. Symbol
1 DB1
XE
2 DB2
*Tighten the Earth screw with a torque of M5: 1.8 to 2.0 N · m.
*Tighten the terminal block (control power) screw with a torque of M4: 0.7 to 1.0 N · m.
If the tightening torque exceeds the maximum value, the terminal block may be damaged.
*Tighten the terminal block (main power supply, regenerative resistance, motor) screw with torque of M5: 2.0 to 2.4 N · m.
If the tightening torque exceeds the maximum value, the terminal block may be damaged
* Tighten the fixing screws for the terminal block cover with a torque of M3: 0.19 to 0.21 N · m.
If it exceeds the maximum value of tightening torque, it may be damaged.
R2.0
Name
Control power
Single phase 200 - 240 V
input terminal
Main power input
3 phase
terminal
To use an external regenerative resistor (customer prepared), connect an
external regenerative resistor between P and B.
Regenerative
In addition, parameter setting is required for the regenerative resistor.
resistor connecting
For details, refer to "Technical Reference - Functional Specification ".
terminal
Do not connect anything to the N terminal.
Motor output Connect each phase of the motor winding.
terminal
U: U phase
Earth
Earth terminal for grounding
Name
· This is a terminal for controlling the electromagnetic contactor (MC) for
External external dynamic brake resistor (customer preparation). Please connect if
Dynamic brake necessary.
Control connection · The applied voltage between DB1 and DB2 must be AC 300 V or less, DC
100 V or less
Description
+ 10 %
- 15 %
+ 10 %
200 - 240 V
- 15 %
V: V phase W: W phase
Description
Industrial Device Solution Business Unit, Panasonic Corporation
No. SX-DSV03335 - 38-
50/60 Hz
50/60 Hz