Advertisement
Table 42 HSR6602-XG/HSR6602-XG TAA panel LED description
LED
CF
(yellow/green)
PWR1
(red/green)
PWR2
(red/green)
FAN
(red/green)
ALM
(red)
RUN
(green)
MANAGEME
NT
(yellow/green)
SFP+LINK/AC
T
(yellow/green)
Status
Description
No CF card is in position or the CF card cannot be
Off
recognized.
Steady green
A CF card is in position and has been detected.
The system is accessing the CF card. In this state, do
Flashing green
not remove the CF card.
Steady yellow
It is a non HP CF card.
Off
The power module is not in position.
Steady green
The power module is supplying power properly.
No power is input or the power module is faulty
Steady red
when PWR2 is operating properly.
Off
The power module is not in position.
Steady green
The power module is supplying power properly.
No power is input or the power module is faulty
Steady red
when PWR1 is operating properly.
Off
No power is input or the fan tray is not in position.
Steady green
The fan tray is working properly.
Steady red
The fan tray is faulty.
The system is operating properly and there is no
Off
alarm.
A fault has occurred. In this state, check the system
Steady red
log immediately.
Off
The system is powered off or the router is faulty.
Flashing at 1 Hz
The router operates properly as configured.
Software is being loaded or the router does not start
Flashing at 8 Hz
working yet.
Off
No link is present.
Steady green
A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at 1000 Mbps.
Steady yellow
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Flashing yellow
Mbps.
Off
No link is present.
Steady green
A 10 Gbps link is present.
Flashing green
Data is being received or transmitted at 10 Gbps.
Steady yellow
The transceiver module check is not passed.
86
Advertisement
