Advertisement
Displaying the operational statistics of the router
When you perform routine maintenance or the system fails, you may need to view the operational
information of each functional module for locating failures. Generally, you need to run display
commands one by one. To collect more information one time, you can execute the display
diagnostic-information command in any view to display or save the operational statistics of multiple
functional modules of the router. This command displays the output of the display clock, display version,
display device, and display current-configuration commands.
•
To save the operational statistics of each functional module of the router, type y when the system
prompts you to save or display the diagnostic information.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[flash:/default.diag]:aa.diag
Diagnostic information is outputting to flash:/aa.diag.
Please wait...
Save succeeded.
Execute the more aa.diag command in user view, and then press the Page Up and Page Down
keys to view the contents of the file aa.diag.
To display the operational statistics of each functional module of the router, type n when the system
•
prompts you to save or display the diagnostic information. The output is too much and omitted here.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================================
===============running CPU usage information===============
=================================================================
===== Current CPU usage info =====
CPU Usage Stat. Cycle: 23 (Second)
CPU Usage
CPU Usage Stat. Time : 2011-12-09
CPU Usage Stat. Tick : 0x2(CPU Tick High) 0x7b652c7(CPU Tick Low)
Actual Stat. Cycle
...Omitted...
Displaying the detailed information about a module
Use the display device verbose command to display detailed information of modules in each slot.
<Sysname>display device verbose
Slot No.
---------------------------------------------------------------------
0
1
Use the display device slot slot-number command to display detailed information about the module in the
specified slot.
<Sysname> display device slot 0
Slot 0 :
SubSlot No.
--------------------------------------------------------
: 3%
: 0x0(CPU Tick High) 0x4774e2b8(CPU Tick Low)
Board type
Status
HSR6602-XG
Normal
N/A
Absent
HSR6602-XG
Card Type
10:36:20
Primary
SubSlots
Master
0
N/A
N/A
Status
Max Ports
50
Advertisement
