Getting Started - Yamaha SEASCOOTER 275L User Manual

Getting Started

When using the SEASCOOTER™ 275L for the first time,
the battery needs to be charged. Follow the the Battery
Instruction on pages 12, 13, 14 and 15 and charging
instructions on pages 16 and 17.
Your SEASCOOTER™ 275L can be used for swimming,
snorkeling or diving up to 40m/130ft (by qualified divers).
To use the SEASCOOTER™ 275L follow these
instructions.
1. Charge the battery and install just before use.
2. Place the SEASCOOTER™ 275L into the water and rock
gently to release trapped air.
3. Adjust buoyancy to suit conditions and personal
preferences - see page 10, Adjustable Buoyancy.
4. When ready to set off, switch the Master Switch to the
ON position (see fig.3).
5. For US version : Pull and hold the left or the right trigger
to start the propeller (see fig.4). The SEASCOOTER™
275L will accelerate up to speed 1.
For EU version : Pull and hold both Triggers to
start the Propeller (see fig.4). The SEASCOOTER™
275L will accelerate up to speed 1.
(There is a short delay before the Propeller begins to
rotate).
LED Battery
Status Indicator
Slide the Master Switch
down to "ON" position
Fig.3
8
6. To increase speed at any time, simply pulse the triggers
off and on again within half a second. The
SEASCOOTER™ 275L will accelerate up to the next
speed. Make sure that only one Trigger is being used at a
time.
Master switch
is ON.
7. When at speed 3, further pulses will have no effect.
8. To stop the Propeller, simply release the Trigger(s).
9. Maintain proper posture to achieve the maximum speed
when using the SEASCOOTER™ 275L – see fig.5 for the
correct position of the SEASCOOTER™ 275L when using
it.
GOOD
BEST
Triggers
Fig.4
Fig.5
9