Trouble Shooting - Yamaha SEASCOOTER 275L User Manual

• ALWAYS remove the battery pod from SEASCOOTER ™
immediately after use.
• DO NOT STORE BATTERY POD IN SEASCOOTER
• DO NOT leave the Seascooter in the water. Always take the
unit out of water when not in use.
Washing and Care
• Always rinse the SEASCOOTER™ in fresh water and
allow it to dry before storage immediately after use.
• To clean the SEASCOOTER ™ do not use detergents,
only use a damp cloth to wipe the unit clean.
• The Battery Housing interior should be kept dry at all
times.
• If the Battery Housing interior gets wet, see page 23,
Accidental Flooding for procedure.
• Always store your SEASCOOTER ™ vertically when not
in use to prevent deformation of the Propeller Nozzle.
Buying Parts
Additional Battery Pods and Charging Bases can be
purchased separately. Contact your local Customer
service center/ distributor to purchase them.
20

Trouble Shooting

Unit does not function
If the Propeller does not start when the triggers are
pressed, make sure:
1. The Master Switch is ON (see fig.3)
2. The Battery Pod is fully charged. (see page 15, charging
the Battery Pod)
3. The battery compartment is dry.
Blocked Propeller
If the Propeller becomes blocked, it will be necessary to
open the Protective Grilles to remove the obstacle.
UNDER NORMAL USE the grilles must not be opened.
NEVER turn ON the propeller when it is blocked, it will
cause serious damage to the gear box.
Opening the grilles to remove obstruction
Warning!
Crushing / Cutting Hazard
Before opening the grille for maintenance purpose, make
sure the master switch is in off position, and the battery is
disconnected.
1. Take the SEASCOOTER™ 275L out from the water.
2. Make sure the Master Switch is in the OFF position.
21
x 12
Fig.20