2 | Hardware Details
6 / 28
2 Hardware Details
2.1 Device Pinout and Connector
Pin #
1
2
3
4
5
6
7
8
9
Mating Connector: ASDD606-09SN
2.2 Recommended Antennas
Antennas used with the LTE65 should be purchased from Bosch Motorsport or an Author-
ized dealer. FCC and CE certifications are conditional on the type of antenna used. Bosch
Motorsport has performed testing to select the antennas with the best efficiency for
motorsport applications.
Two different in car antennas and one pit stand antenna are available from Bosch
Motorsport, see also Car Specific Antennas [} 7].
Recommended torque spec for the antenna connection: 4 in-lbs (0.45 Nm)
2.3 Mounting and Environmental Considerations
Operating Temperature ambient
Storage Temperature
Max Vibration
Sealing Tightness
*Vibration profile defined and available on the Bosch Motorsport Website.
2.4 Drawings
– A mechanical offer drawing is available in LTE65 Offer Drawing [} 22].
– A pit box harness layout drawing and schematic is available in Pit Stand Harness
Drawing [} 23].
Telemetry_System_LTE65_Manual
Description
Battery positive
RS232_RX
Reset
RS232_TX
Battery negative
ETH_RX+
ETH_RX-
ETH_TX+
ETH_TX-
-30 to 65°C
-30 to 85°C
MSD Vibration Profile 1*
IP67
Bosch Motorsport