Advertisement
4. Unscrew partially screw A until the transfer/separation corotron can be lifted. Lift it partially and
unplug terminal B. Remove the assembly paying attention to the way the corotron is attached in
the rear end C.
5. Remove screws D and the registration roller cleaning felt E. Clean the felt with vacuum cleaner
from the paper dust. Using a cloth soaked with rubber roller cleaning fluid, rub the registration
roller F until you can touch clean rubber. This is an important step, because a dirty roller can
cause registration (misalignment) problems with the copy. See figure 10.
C
D
A
E
10
F
B
Advertisement
