Operation; Names Of Each Part - Sony MJ620 Instruction Manual

3. Operation

3-1. Names of each part

1 MODE switches 1 and 2
The resolution switch, reference point adjustment, etc., determine the functions of the
unit as an interpolator.
2 ABS lamp
Lights when the reference point input signal is active.
3 POS. lamp
Used while setting the reference point.
4 LEVEL ALARM lamp
Lights when the input signal is out of the range allowed by the specifications.
MJ620
SW1 SW2
1 MODE switches 1 and 2
(SW1, SW2)
2 (Orange) ABS lamp
3 (Green) POS. lamp
4 (Red) LEVEL ALARM lamp
5 (Red) SPEED ALARM lamp
6 Encoder signal input connector
7 Output connector
3
(E)