Hitachi EC701HP Operation Manual page 65

Section 3 - Installation (ATSC EC701HP Transmitter)
D- Programming
a. The transmitter is ready to receive ASI transport streams as programming source.
b. Programming BNC connector is located on the top panel of the transmitter.
c. Connect the applicable signal cables on the top cover of the rack.
Manual Rev. 0.0 - March 2018
RF AFTER FILTER IN A
GPS ANTENNA IN A
ASI 1 INPUT
ASI 2 INPUT
ASI 1 OUTPUT
External 10MHz
reference
Connections Panel - Transmitter
Figure 3-27
3-28