Table of Contents
Advertisement
E-COMPACT UHF Transmitter
HITACHI E-COMPACT SERIES™ INSTALLATION GUIDE
Version 1.0
INSTALLATION CONSIDERATIONS:
Thank you for selecting Hitachi LINEAR for your TV Broadcast needs.
The transmitter you are about to install was tested and approved by Hitachi LINEAR
quality control. It is factory set on the requested channel and output power, and in
accordance with ANATEL regulations. No setting changes are required for the
transmitter to go on the air.
After unpacking the transmitter and before the broadcast transmission starts, a qualified
Broadcast Engineer should perform the transmitter installation as suggested by this
guide and to protect your warranty.
The installation should take approximately 1 hour for all tasks related with the
transmitter. The installation can be completed successfully without the use of
instruments, and does not require special tools. However for installation quality
purposes, a performance check is recommended as in accordance with best-
engineering-practices.
We are certain that with proper installation and in a properly prepared transmission
facility that you and your station will benefit from your Hitachi LINEAR transmitter for
many years to come.
For additional questions and/or issues regarding your installation, please contact us at:
HITACHI KOKUSAI LINEAR EQUIPAMENTOS ELETRÔNICOS S/A.
Technical Support Contact information:
linear@linear.com.br
Mobile: (+5535) 9103-1081
Fax: (+5535) 3473-3474
Phone: (+5535) 3473-3473
Thank you,
Your HITACHI Sales & Support Team –
Advertisement
Table of Contents
