Sony BDX-D1000 Installation Manual page 29

* * * * * TST? (Test Query)
This command requests the results of the self-diagnostics
stored in the buffer.
The responses for each self-diagnostics are as follows:
2: DEC Board OK ERROR
3: TSI Board OK ERROR
4: DIO Board OK ERROR
5: DAC Board OK ERROR
6: DP Board OK ERROR
FLAGS? (Flag Query)
This command requests the flag information.
The following five flags are defined.
Power cycled on : Returns "yes" only one time when
power is turned on.
EDH now : Returns "no" at all times.
EDH in past : Returns "no" at all times.
EDA now : Returns "no" at all times.
EDA in past : Returns "no" at all times.
* * * * * STATUS? (Status Query)
This command requests the current operation status.
There are two varieties of statuses.
DECODE : During normal operation
ERROR : During abnormal operation
* * * * * CMDERR? (Command Error Query)
When an error detected by the error check for received
command, the content stored in the buffer. This command
requests the contents of the command error buffer.
BDX-D1000
* * * * * MSG? ##### (Message Register Query)
This command requests the error/warning status that occur
in the BDX-D1000.
"######" is a register number, and it is defined as follows:
Register No. Description
65 FAN ERROR
100 DEC BOARD ERROR
101 TSI BOARD ERROR
102 DIO BOARD ERROR
103 DAC BOARD ERROR
104 DP BOARD ERROR
HELP:TST? (Help: Test Menu Query)
This command requests the self diagnostics menu.
The BDX-D1000 supports the following self-diagnostics
menu:
Test No. Description
002 DEC Board
003 TSI Board
004 DIO Board
005 DAC Board
006 DP Board
DEVID (Device ID Set)
This command is used to set the device ID.
This setting data will be reflected in "Device ID" of
response to "* IDN?" command.
When the setting is complete, the BDX-D1000 returns
"* ATN:OPC;".
3-3. ISR
3-9 (E)