Installing Updates For The Home Connect Software - Bosch B0 IB Series Instruction Manual

en-us Home Connect
Connecting the appliance to the
Home Connect app
Press | button.
1.
The refrigerator compartment temperature display
shows Cn.
Keep pressing ¾/¿ refrigerator compartment
2.
button until the refrigerator compartment
temperature display shows PA and the freezer
compartment temperature display shows OF.
Press ¾/¿ freezer compartment button to connect
3.
the appliance to the app.
The freezer compartment temperature display
shows an animation.
As soon as the refrigerator and the app are
connected, the freezer compartment temperature
display shows On.
Open the app and wait until the refrigerator is
4.
displayed.
Press Add to confirm the connection between the
app and the refrigerator.
If the refrigerator is not automatically displayed,
click on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
Follow the instructions in the app until the
5.
process is complete.
The refrigerator compartment temperature display
shows PA and the freezer compartment
temperature display shows On.
The refrigerator has been connected to the app.
If the connection fails, check whether the mobile
device is connected to the home network
(WLAN).
Then try to establish the connection again.
If Er appears in the freezer compartment
temperature display, reset the Home
Connect settings.
On resetting, all Home Connect settings are
Note:
reset.
Verifying signal strength
You should verify the signal strength if no connection
can be established.
Press | button.
1.
The refrigerator compartment temperature display
shows Cn.
Press ¾/¿ refrigerator compartment button until
2.
the refrigerator compartment temperature display
shows SI. In the freezer compartment
temperature display, a value appears between 0
(no signal) and 3 (full signal).
The signal strength should be at least 2. If the
signal strength is too weak, the connection may
be interrupted.
– Place the router and refrigerator closer
together.
– Check that screening walls do not interfere
with the connection.
– Alternatively, install a repeater to make the
signal stronger.
16
Resetting Home Connect settings
If there is a problem when trying to establish a
connection, or if you would like to register the
appliance in a different home network (WLAN), the
Home Connect settings can be reset:
Press | button.
1.
The refrigerator compartment temperature display
shows Cn.
Press ¾/¿ refrigerator compartment button until
2.
the refrigerator compartment temperature display
shows rE and the freezer compartment
temperature display shows OF.
Press ¾/¿ freezer compartment button.
3.
The freezer compartment temperature display
shows an animation for 15 seconds.
The freezer compartment temperature display
then shows OF.
The Home Connect settings have been reset.
Installing updates for the Home
Connect software
The refrigerator checks at regular intervals whether
updates are available for the Home Connect
software.
If an update is available, the refrigerator
compartment temperature display shows UP.
Press any button to reset the display to the set
temperature.
Installing the update:
Press | button.
1.
The refrigerator compartment temperature display
shows Cn.
Press ¾/¿ refrigerator compartment button until
2.
the refrigerator compartment temperature display
shows UP and the freezer compartment
temperature display shows OF.
Press ¾/¿ freezer compartment button.
3.
The freezer compartment temperature display
shows an animation.
The update is installed.
All buttons are locked during installation.
– If the installation has been successfully
completed, the freezer compartment
temperature display will show On.
– If the installation has not been successfully
completed, the freezer compartment
temperature display will show Er.
Start the update again at a later time.
If the installation has still not been successfully
completed after several attempts, inform
customer services.