Table of Contents
Advertisement
ARD-AYCE65B
5
Reader Functionality
The following explains how to use the ARD-AYCE65B reader.
5.1
Transmit Mode
When the ARD-AYCE65B is in Transmit Mode, it is ready to
receive data from a presented Proximity Card or an entered PIN
code.
When the reader is in Transmit Mode, the Transmit LED is red
and the Program LED is off.
When a Proximity Card or PIN entry is being transmitted, the
Transmit LED will flash green.
PIN data can be sent via one of eight different Keypad
Transmission Formats. For more information, see Selecting
Keypad Transmission Format on page 13.
Proximity Cards presented to the reader are always sent in
either 26-Bit Wiegand, Clock & Data or, Wiegand Card + PIN
format. See Selecting Proximity Card Transmission Format on
page 20 for more information.
5.2
Programming the ARD-AYCE65B Series
Programming the ARD-AYCE65B series is done solely via the
unit's keypad driven Programming Menu System. To reach the
Programming Menu System the ARD-AYCE65B must first be
placed into Programming Mode. During the ARD-AYCE65B's
manufacturing process certain codes and settings are pre-
programmed. These settings are called the "Default Factory
Settings".
The table below shows the names of all the ARD-AYCE65B
Menus.
Bosch Sicherheitssysteme GmbH
Installation manual
Reader Functionality | en
| V 1.1 | 2009.08
11
Advertisement
Table of Contents
