GE Profibus - DP Bus Instructions Manual page 28

-_-_-_,-- -- ---
Example No. 2:
The Ramp+ parameter of the GE DV-300 drive must be assigned to the channel No. 0 of the virtual digital
output; such parameter has the index 215Ah. L
The initial conditions are the following:
1 ) Parameter index of virtual digital output configufation: 5EFDh.
2 ) Virtual digital output channel to be configured: 0.
3 > DV-300 drive parameter index corresponding to Ramp+: 215Ah.
FDh 5Eh OOh 5Ah 21h XX XX
1 Digital output channel involved
in the operation
Parameter index of digital
output configuration
Control Byte
(See Par. 3.1)
L
1 L ~~~~~~eter index to be ! 1
assigned to the digital Output