Storage - Husqvarna WT2GO Operator's Manual

Threaded fittings
Check threaded fittings are tight to ensure a good seal. Do not use hand tools to over tighten
threaded fittings as damage may occur.
Tools can be used to gently loosen fittings on hose if required.
The barb fitting on the top lid of the device can be tightened/loosened by hand. Use cloth to improve
grip if tight. Use of multi grip plyers may be required if too tight. Use gently avoiding damage to barb
and WT2GO top lid frame.

STORAGE

Long term storage instructions
It is not advised to store a full WT2GO for long periods (weeks/months) as this may reduce
performance of your product. Empty your WT2GO before long-term storage.
Do not clean inside tanks with soaps or other cleaning agents/products, rinse with fresh water and
empty.
WT2GO - User Manual Page 10 of 15