Repeated Playback - Kenwood CD Series Instruction Manual

Repeated playback

Preparation
18
™
To repeat only the programmed tracks
Downloaded from: http://www.usersmanualguide.com/
÷ Load a disc in the CD player.
1
Press so t hat t he " PGM " indicat or
lights.
P.M ODE
2
Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4
Go to step 3 w ithin 8 seconds.
3
Select the desired track number.
M ain unit Remote control unit
1 2
4 ¢
4 5
7 8
0
Go to step 4 w ithin 8 seconds.
4
Set the entry.
P.M ODE
5
Repeat steps 2 – 4 above.
6
Press the REPEAT key.
REPEAT
For the CD-206/ DPF-R6010
The current status is displayed w hen the key
is pressed once.
When it is pressed w hile the status is dis-
played, the repeat ON status can be set to OFF
(or vice versa).
7
Start playback.
6
REM OTE CON TROL UN IT
RC-P0 6 0 1
: Keys and controls used in the operations described on this page.
CD-206/ DPF-R6010
P G
CD-204/ 203/ DPF-R4010/ R3010
DISC 5
÷ All of the programmed tracks w ill be repeated.
÷ In case only one track is programmed, only that track w ill be repeated.
÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no
3
more tracks can be programmed.
6
9
+1 0
CD-206/ DPF-R6010
CD-204/ 203/ DPF-R4010/ R3010
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)
Hereafter the illustration of the common parts
on the front panel is of CD-206/ DPF-R6010.
M 1 0 D I S ? C
PGM indicator light up.
PGM
1 2 3 4 5
R E P E A T ON
REPEAT indicator light up.
PGM
DISC REPEAT
N O. TRACK N O.
3
0 1
1 2 3 4 5