Repeated Playback - Kenwood CD-206 Instruction Manual

Repeated playback

Preparation
÷ Load a disc in the CD player.
18
™
To repeat only the programmed tracks
1
2
3
4
5
6
7
Downloaded From DvDPlayer-Manual.com Kenwood Manuals
Press so that the "PGM" indicator
lights.
P.MODE
Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4
Go to step 3 within 8 seconds.
Select the desired track number.
Main unit Remote control unit
1 2
4 ¢
4 5
7 8
0
Go to step 4 within 8 seconds.
Set the entry.
P.MODE
Repeat steps 2 – 4 above.
Press the REPEAT key.
REPEAT
For the CD-206/DPF-R6010
The current status is displayed when the key
is pressed once.
When it is pressed while the status is dis-
played, the repeat ON status can be set to OFF
(or vice versa).
Start playback.
6
REMOTE CONTROL UNIT
RC-P0601
: Keys and controls used in the operations described on this page.
CD-206/DPF-R6010
P G
CD-204/203/DPF-R4010/R3010
DISC 5
÷ All of the programmed tracks will be repeated.
÷ In case only one track is programmed, only that track will be repeated.
÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no
3
more tracks can be programmed.
6
9
+10
CD-206/DPF-R6010
CD-204/203/DPF-R4010/R3010
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
Hereafter the illustration of the common parts
on the front panel is of CD-206/DPF-R6010.
M 1 0 D I S ? C
PGM indicator light up.
PGM
1 2 3 4 5
R E P E A T ON
REPEAT indicator light up.
PGM
DISC REPEAT
NO. TRACK NO.
3
0 1
1 2 3 4 5