Saving/Loading A Song; Saving The Current Song - Yamaha AW4416 Operation Manual

in record-ready mode. Then access the TRACK screen Stereo page ([TRACK] key
[F3] (Stereo) key), and hold down the [SHIFT] key and press the [F1] (REMAIN)
key. The counter will show the REMAIN TIME (remaining time). For example if
you wish to create a 74 minute CD, make sure that the remaining time is at least
74 minutes.
If there is not enough free area on the hard disk, you must delete audio data for
unneeded tracks or virtual tracks (
operation (
free area by performing any other operation.)

Saving/loading a song

Here's how to save the current song on the internal hard disk, and how to load a
song from the internal hard disk into the current song.

Saving the current song

1. Press the [SONG] key
The SONG screen Song List page will appear in the display. A list of information
on the songs currently saved on the internal hard disk will appear in the upper
part of the display. The current song will be highlighted in the list.
1 Song name
B Date and time when the song was saved
C Song size
D Song quantization/sampling frequency
E Song protect
2. To save the current song, move the cursor to the SAVE button in the
lower right of the screen and press the [ENTER] key.
P.156), and then execute the Song Optimize
P.182) to increase the free area. (It is not possible to increase the
[F1] key.
1
Chapter11—Song management
2 3 4 5
— Operation Guide
177