Saving A Scene/Song; Saving A Scene - Yamaha AW4416 Operation Manual

Saving a scene/song

Saving a scene

If you wish to reproduce the mixer settings as well when you recall the current
song at a later time, you must store the current mix parameters as a Scene.
1. Use the [
to select the store destination scene number (01–96).
The currently selected scene number will appear in the upper right of the level
meter/counter.
Scene number 00 contains a preset recall-only scene that returns all mix parame-
ters to their default state. For this reason, it is not possible to store a scene into
number 00.
2. Press the SCENE MEMORY section [STORE] key.
The TITLE EDIT popup window will appear, allowing you to assign a name to the
scene memory.
Tip!
If STORE CONFIRMATION is turned "OFF" in the UTILITY screen Prefer.1 page
([UTILITY] key
number without displaying this confirmation popup window. This is more conve-
nient if you will be repeatedly overwriting a scene onto the same scene number.
]/[ ] keys in the SCENE MEMORY section of the top panel
PROFESSIONAL AUDIO WORKSTATION
SCENE MEMORY
STORE RECALL
WORD CLOCK MTC
M S F ms
44.1k 48k LOCK MASTER
INT EXT VARI SLAVE
5 6 7 8 9 10 11 12 13 14 15 16
[F2] key), the scene will be stored directly to the specified scene
Chapter5—Recording on the AW4416
SCENE MEMORY
STORE
MTC SCENE
MASTER
SCENE
SLAVE
E
E
–dB 0
FINE
2
6
–dB 0
10 12
14 20
FINE
18
30
2
20
42
26 60
L R
READY
INPUT
RECALL
105
— Operation Guide