Table 1 Initial Configuration Parameters for Power Supply and Distribution Devices
Device Name
Project Configuration
■Involved □Not involved
Integrated UPS & MCCB
Note: The following device parameters are not all parameters of the devices. Only the parameters that need to be set for the project are listed. Default values will be used for the other parameters so
they do not need to be set. To view other device parameters, see the user manual for the corresponding device.
If voltage/frequency settings for power distribution devices are involved, adjust the voltage and frequency settings based on the local voltage system and check whether the voltage thresholds and
frequency hysteresis meet setting requirements before first operation.
Component
Category
Basic
Output voltage level
Output frequency
Basic Param.
Battery
capacity
Quantity
UPS-1/2
Initial Configuration Parameters for an Integrated UPS