Yamaha 02R96 Owner's Manual page 249

236
Appendix A: Parameter Lists
REV+FLANGE
One input, two output reverb and flanger effects in parallel.
Parameter
INI. DLY
REV TIME
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV/FLG
FREQ.
DEPTH
MOD. DLY
FB. GAIN
WAVE
SYNC
NOTE
1.
REV->FLANGE
One input, two output reverb and flanger effects in series.
Parameter
INI. DLY
REV TIME
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV BAL.
FREQ.
DEPTH
MOD. DLY
FB. GAIN
WAVE
SYNC
NOTE
1.
02R96—Owner's Manual
Range Description
0.0–500.0 ms Initial delay before reverb begins
0.3–99.0 s Reverb time
0.1–1.0 High-frequency reverb time ratio
0.1–1.0 Spread
0–100% Reverb density
THRU, 21.2 Hz–8.00
High-pass filter cutoff frequency
kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
Reverb and flange balance (0% = all reverb, 100% = all
0–100%
flange)
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
0.0–500.0 ms Modulation delay time
Feedback gain (plus values for normal-phase feedback,
–99 to +99%
minus values for reverse-phase feedback)
Sine, Tri Modulation waveform
OFF/ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.
Range Description
0.0–500.0 ms Initial delay before reverb begins
0.3–99.0 s Reverb time
0.1–1.0 High-frequency reverb time ratio
0.1–1.0 Spread
0–100% Reverb density
THRU, 21.2 Hz–8.00
High-pass filter cutoff frequency
kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
Reverb and flanged reverb balance (0% = all flanged reverb,
0–100%
100% = all reverb)
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
0.0–500.0 ms Modulation delay time
Feedback gain (plus values for normal-phase feedback,
–99 to +99%
minus values for reverse-phase feedback)
Sine, Tri Modulation waveform
OFF/ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.