Yamaha 02R96 Owner's Manual page 201

188
Chapter 18—Pro Tools Remote Layer
Trim Mode
Trim mode can be set as follows.
1 While holding down a channel's [AUTO] button, press the USER DEFINED
KEYS [7] (TRIM) button.
If channel Display mode [F3] or Meter Display mode [F4] is currently selected, the chan-
nel's Automation mode is displayed while its [AUTO] button is pressed.
Auto trim/write
Auto trim/touch
Auto trim/latch
Auto trim/read
You can display the Automation mode settings of all channels by pressing and holding the
USER DEFINED KEYS [DISPLAY] (AUTO STATUS) button.
Grouped channels are set together.
Arming Parameters for Automation
Parameters can be selected for automation recording as follows.
Use the following USER DEFINED KEYS to arm parameters.
1
USER DEFINED KEYS
[11] (FADER)
[12] (MUTE)
[13] (PAN)
[14] (SEND)
[15] (SEND MUTE)
[16] (PLUG-IN)
The button indicators for armed parameters light up.
02R96—Owner's Manual
Pro Tools Display
TWrt
Flashing red/orange (Record Ready)
TTch
Orange (Recording)
TLch
TRd Flashing green/orange
Pro Tools
Volume
Mute
Pan
Send level
Send mute
Plug-in
[AUTO] Button Indicators