Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual page 113

Button
[PAN] ( or [SHIFT]+[PAN] ➝ Knob)
PAN mode
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
(Surround Audio Channel)
[SHIFT]+Knobs 1 – 8 (pressing)
[FLIP]
[PAN] in the PAN mode
[SEND] ( or [SHIFT]+[PAN] ➝ Knob)
SndVal mode
Knobs 1 – 8 (turning)
DISPLAY [ / ]
Cursor [ / ]
Knobs 1 – 8 (pressing)
[SHIFT]+Knobs 1 – 8 (pressing)
[FLIP]
[SEND] in the SndVal mode
[SHIFT]+[PAN] ➝ Knobs
SndOut mode
DISPLAY [ / ]
Cursor [ / ]
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
(except when selecting a bus)
[SHIFT]+[PAN] ➝ Knob
Input mode
Knobs 1 – 8 (turning)
[SHIFT]+[PAN] ➝ Knob
Output mode
Knobs 1 – 8 (turning)
[SHIFT]+[DYNAMICS] ( or [SHIFT]+[PAN] ➝ Knob)
Effect mode
Knobs 1 – 8 (turning)
DISPLAY [ / ]
Cursor [ / ]
Knobs 1 – 8 (pressing)
[EQ LOW]/[EQ LOW-MID]/
[EQ HIGH-MID]/[EQ HIGH]
+Knobs 1 – 8 (pressing)
[EDIT] (when any track is selected)
[SHIFT]+[PAN] ➝ Knob
Effect Edit mode
Knobs 1 – 8 (turning)
DISPLAY [ / ]
Cursor [ / ]
Cursor [ / ]
[SHIFT]+BANK [</>]
BANK [</>]
[FLIP]
[SHIFT]+[PAN] ➝ Knob
Prefs mode
Knobs 1 – 8 (pressing)
No function
[WRITE] [F1] – [F8] [SHIFT]+[F8]
For editing parameters.
Enters the PANNER Effect Edit mode. Press the [EDIT] button to return to the PAN
mode.
Resets the edited parameter to the default value (center).
Switches the functions of the Channel Knobs and the Faders.
Turns the Meter on or off.
For editing parameters.
Changes the Send number.
Sets Mute to on or off.
esets the parameter value to the default (0 dB).
Switches the functions of the Channel Knobs and the Faders.
Turns the Meter on or off.
Changes the Send number.
Selects the bus for each Send of the track.
Switches between Send PRE and POST.
Selects an input bus for a track.
Selects an output bus for a track.
Selects a Plug-in Effect for each track.
Changes the Effect Number.
Turns the Effect Bypass on or off. When the bus is turned on, X is indicated above the
Effect name.
Assigns the Parametric EQ to the corresponding track.
Enters the Plug-in Effect Edit mode. Press [EDIT] again to exit from the Edit mode.
For editing parameters.
Changes an Effect Number.
Calls up the Effect of a different track.
Changes the parameters to be edited with the Knobs in order one by one.
Changes the parameters to be edited with the Knobs in groups of eight.
Switches the functions of the Channel Knobs and the Faders.
• LvlMtr........ Turns the Meter indication on or off. (the same as [SHIFT]+[NAME/
VALUE])
• SrlTks ........ Determines whether the displayed tracks of the 01X and those of the mix-
ing board in Digital Performer are synchronized or not.
• FtSwtc........ Switches between the footswitch assignments: PLAY/REC, or F5/F6 (on
computer keyboard).
Function
Remote Function List
Notes
LED
(page 114)
lights *26
—
—
—
lights *37
—
*26
—
— *11
—
—
lights *37
—
— *11
—
— *26
—
—
[DYNAMICS]
*34
lights
—
— *11, 35
— *19
—
*21, 27,
lights/goes out
35
[DYNAMICS]
[EDIT] *34
lights
—
*11
lights *37
[DYNAMICS]
[EDIT]
lights
—
113
01X Owner's Manual